Original price was: 78,00 €.Current price is: 50,71 €. incl. VAT & plus shipping costs

42.61€ Incl. 0% VAT plus shipping costs for orders pursuant to §12 para. 3 VAT Act (Zero Tax Rate)

35% Off

Delivery Time: approx. 3-4 working days

Would you like to purchase larger quantities?

Then contact us here: Contact form

To apply the zero-rated tax price, you must confirm at the checkout that you are authorized to purchase these products at the zero-rated tax price. There is a field where you can check the box.

SKU: 310333

Description

Item number : 310333
Application: BoostPack 3S
Connection: AMP – TE 8-215083-0 Wire-To-Board connector
Operating voltage: 12V DC
Voltage range: 9.0 – 12.6V
Shunt resistance: 3.2 Ohm
Balancing current Inom: 1A at 3.2V (max. 1.3A at 4.2V)
Ptot: 3.2W (max. 5.5W)
Voltage measurement accuracy: +/-10mV
Temperature range: -40°C to +80°C
Temperature measurement accuracy: 2K

Please note during installation:

After placing the cell connectors on the poles, the cell boards are screwed onto the cell connectors. To ensure a secure contact, we recommend securing the cell connector with a threaded bolt, washer and nut. The cell board is then mounted on the cell connector. It is essential to ensure that the polarity of the cell and the cell board match (+ and – polarity is marked on the board)!

As a resistor is installed on the back of the cell board, it must not come into direct contact with the battery. Failure to do so may result in damage for which we accept no liability.

Additional information

Weight 0,03 kg

Downloads and documents

Operating instructions_BMS_V3

New_addressing_problem_solution_L-Line

Original price was: 78,00 €.Current price is: 50,71 €. incl. VAT & plus shipping costs

42.61€ Incl. 0% VAT plus shipping costs for orders pursuant to §12 para. 3 VAT Act (Zero Tax Rate)

35% Off

Delivery Time: approx. 3-4 working days

Would you like to purchase larger quantities?

Then contact us here: Contact form

To apply the zero-rated tax price, you must confirm at the checkout that you are authorized to purchase these products at the zero-rated tax price. There is a field where you can check the box.

Description

Item number : 310333
Application: BoostPack 3S
Connection: AMP – TE 8-215083-0 Wire-To-Board connector
Operating voltage: 12V DC
Voltage range: 9.0 – 12.6V
Shunt resistance: 3.2 Ohm
Balancing current Inom: 1A at 3.2V (max. 1.3A at 4.2V)
Ptot: 3.2W (max. 5.5W)
Voltage measurement accuracy: +/-10mV
Temperature range: -40°C to +80°C
Temperature measurement accuracy: 2K

Please note during installation:

After placing the cell connectors on the poles, the cell boards are screwed onto the cell connectors. To ensure a secure contact, we recommend securing the cell connector with a threaded bolt, washer and nut. The cell board is then mounted on the cell connector. It is essential to ensure that the polarity of the cell and the cell board match (+ and – polarity is marked on the board)!

As a resistor is installed on the back of the cell board, it must not come into direct contact with the battery. Failure to do so may result in damage for which we accept no liability.

Additional information

Weight 0,03 kg

Downloads and documents

Operating instructions_BMS_V3

New_addressing_problem_solution_L-Line

This might also interest you…