Solar Essentials

Victron Energy Battery Balancer BBA000100100 – Voltage Equalizer for Battery BanksThe Victron Battery Balancer BBA000100100 is designed to equalize the state of charge between two series-connected 12V batteries that do not have an internal balancing function. It ensures both batteries maintain a consistent charge level, helping to extend battery life and system performance.Suitable for 24V and 48V SystemsIn 24V systems, a single Battery Balancer is sufficient. For 48V systems with four 12V batteries connected in series, three Battery Balancers are required – one between each battery pair.Automatic Compensation for Voltage DifferencesOnce the charging voltage of a 24V system exceeds 27V, the Battery Balancer automatically activates. It compares the voltage levels of the two batteries and draws a current of up to 0.7A from the battery with the higher voltage. This difference in charge current helps the batteries equalize their state of charge.Compact, Scalable, and InformativeMultiple Battery Balancers can be connected in parallel to support complex systems with multiple strings. A built-in LED indicator provides visual feedback on the current status.Key Features:✔ Voltage Equalization: Balances two series-connected 12V batteries✔ System Compatibility: Works in 24V and 48V systems (three units required for 48V)✔ Balancing Current: Up to 0.7A (recommended cable cross-section ≥ 0.75mm²)✔ Status Indication: LED indicator for operating state✔ Expandable: Multiple units can be paralleled for large battery banks✔ Compact Design: Ideal for space-constrained installationsTechnical Specifications:Model:Victron Battery Balancer BBA000100100System Voltage:24V / 48V (3 units required for 48V)Balancing Current:Max. 0.7ARecommended Cable:Minimum 0.75 mm² cross-sectionStatus Indicator:LEDDimensions:100 x 113 x 47 mmThe Victron Battery Balancer is the ideal solution for keeping your series-connected battery banks balanced and healthy – increasing performance and extending battery lifespan.

Victron Battery Monitor BMV-712 Smart 9V – 90V DCThe Victron BMV-712 Smart is a high-precision battery monitor designed to reliably track battery capacity. Featuring integrated Bluetooth and a VE.Direct port, it is ideally suited for modern energy systems and offers versatile monitoring and control capabilities for 12V, 24V, 36V, and 48V battery setups.Key Features✔ Monitoring system consisting of 500 A shunt and display✔ Compatible with 12V, 24V, 36V, and 48V battery systems✔ Integrated Bluetooth for wireless communication and system monitoring✔ Programmable relay output for alarms or generator start/stop functions✔ VE.Direct interface for connection to Victron GX control systems✔ Easy installation with 10 m RJ12 cable and pre-fused connection leads✔ Includes square mounting bezelSpecial FeaturesWith built-in Bluetooth, the BMV Smart is ready for the era of the Internet of Things (IoT). Wireless communication with other Victron Energy products greatly simplifies system installation and improves data transfer efficiency.The VictronConnect App allows you to easily configure and monitor the device:Adjust settingsView all key information at a glanceAccess historical dataUpdate firmware when new features are releasedThe shunt connects to the monitor via a standard RJ12 cable. The package includes both square and round bezels, along with mounting options for front or rear panel installation.The integrated midpoint voltage monitoring helps detect early-stage issues caused by damaged cells, which can compromise an entire battery bank. For increased lifespan of series-connected lead-acid batteries, we recommend the optional Battery Balancer (BBA000100100).Technical SpecificationsModelBMV-712 SmartProduct NumberBAM030712000Voltage Range9V – 90V DCBluetoothIntegratedShunt500 A, RJ12 connectorConnection Cables10 m RJ12, 2x pre-fused leadsMounting BezelSquare (optional round)Dimensions65 x 65 x 30 mmCommunicationVE.Direct, BluetoothFor more details, visit the official Victron Energy product page.

Battery Switch ON/OFF 275AThe Battery Switch ON/OFF 275A is designed for battery systems up to 48 V. It features a unique, ergonomic, and aesthetically pleasing knob that is removable for insulation or safety purposes.Versatile Mounting OptionsThe battery switch supports both surface mounting and rear panel mounting, offering flexibility during installation.Ignition Protection and SafetyThe switch complies with the ISO8846 ignition protection standard, making it suitable for use in engine rooms and ensuring maximum safety standards.

Victron Wallbox Housing for EV Charging Station NS – Black (EVC200300310)The Victron Wallbox Housing Front Cover is a high-quality replacement part for the Victron EV Charging Station NS. Designed for easy installation and optimal fit, this durable housing gives your charging station a refreshed and professional look.Key Features:✔ Material: Durable plastic for long-lasting use.✔ Color: Sleek black finish to match any setting.✔ Protection Rating: IP44 – suitable for various environments.Technical Specifications:Compatible with:Victron EV Charging Station NSProtection Rating:IP44Material:PlasticColor:BlackDimensions (H x W x D):372 x 292 x 122 mmWeight:0.7 kgAdditional Information:For more details about the Victron EV Charging Station NS, visit the following link:Victron EV Charging Station NS – More Information

Victron Blue Smart IP22 Charger 12/15 (1) BPC121542002 – Intelligent 12V Charger with BluetoothThe Victron Blue Smart IP22 Charger 12/15 (1) is an advanced 12V battery charger featuring a 6-stage charging algorithm and a maximum charging current of 15A, adjustable to 50%. Ideal for use in workshops as well as with cars, motorcycles, boats, and RVs.Powerful, Efficient & Battery-FriendlyEquipped with a smart charging algorithm, this charger automatically adapts to your battery type. It supports all common battery chemistries, including lithium, and is capable of recovering deeply discharged batteries. Predefined and user-customizable charging profiles are available for full flexibility.Bluetooth Connectivity & App ControlWith built-in Bluetooth, you can configure and monitor the charger via the VictronConnect app on your smartphone or tablet. Access live charge data, history, and settings – wirelessly and conveniently.Compact, Safe, and VersatileThe compact form factor, quiet operation, and robust 13 mm screw terminals make this charger suitable for a wide range of applications. It can also be used as a DC power supply for steady voltage output when needed.Key Features:✔ Charge Current: Max. 15A, adjustable to 50%✔ Charging Algorithm: 6-stage profile for optimal battery health✔ Battery Compatibility: Works with all types including lithium – with preset or custom profiles✔ Bluetooth: Configure and monitor via the VictronConnect app✔ Power Supply Mode: Operates as a regulated DC power source✔ AC Input: 180–265V AC, 45–65Hz, with 1.5 m power cable and Schuko plug✔ Output: 13 mm screw terminals✔ Dimensions: 235 x 108 x 65 mm✔ Weight: 1.3 kgTechnical Specifications:Model:Victron Blue Smart IP22 Charger 12/15 (1) BPC121542002Output Voltage:12VMax Charge Current:15A (adjustable to 50%)Charging Algorithm:6-stage (user-configurable)AC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput:13 mm screw terminalsDimensions:235 x 108 x 65 mmWeight:1.3 kgThe Victron Blue Smart IP22 Charger 12/15 is a smart, flexible, and Bluetooth-enabled charger – ideal for workshop setups, mobile energy systems, and everyday battery maintenance.

Victron Blue Smart IP22 Charger 12/15 (3) BPC121544002 – 3-Output 12V Smart Charger with BluetoothThe Victron Blue Smart IP22 Charger 12/15 (3) is an advanced 12V battery charger with a 6-stage charging algorithm and a maximum current of 15A, adjustable to 50%. It features three independent output terminals for charging multiple battery banks, making it ideal for workshop environments, vehicles, boats, and RVs.3 Outputs with Intelligent Current DistributionThis model features three isolated DC outputs. Although all three outputs share the same charging profile, the charger intelligently distributes current based on the state of charge. The weakest battery is prioritized, and up to the full 15A can be delivered to a single output if needed.Smart Charging for All Battery TypesThe IP22 charger supports all common battery chemistries including Lithium. It comes with pre-configured charging profiles and allows full customization of charging parameters. Even deeply discharged batteries can be recovered thanks to its intelligent low-voltage start function.Bluetooth Monitoring & App ControlWith built-in Bluetooth, you can configure and monitor the charger using the VictronConnect app on your smartphone, tablet, or laptop. This enables you to view charge status, history, and make settings adjustments wirelessly and conveniently.Versatile and Compact DesignThanks to its compact size, quiet operation, and robust 13 mm screw terminals, the charger is suited for a variety of applications. It can also function as a DC power supply when required, offering stable voltage output for connected devices.Key Features:✔ Charging Current: Max. 15A, adjustable to 50%✔ Outputs: 3 DC outputs with automatic current distribution✔ Charging Profile: Single charging profile for all outputs✔ Battery Compatibility: Suitable for all battery types including lithium✔ Bluetooth: Full monitoring and control via VictronConnect app✔ Power Supply Mode: Can also operate as a DC power source✔ AC Input: 180–265V AC, 45–65Hz, 1.5 m cable with Schuko plug✔ Output Terminals: 13 mm screw terminals✔ Dimensions: 235 x 108 x 65 mm✔ Weight: 1.3 kgTechnical Specifications:Model:Victron Blue Smart IP22 Charger 12/15 (3) BPC121544002Output Voltage:12VMax Charge Current:15A (adjustable to 50%)Number of Outputs:3 (with shared charging profile)Charging Algorithm:6-stage, user-configurableAC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput Terminals:13 mm screw terminalsDimensions:235 x 108 x 65 mmWeight:1.3 kgThe Victron Blue Smart IP22 Charger 12/15 (3) is the ideal solution for smart, flexible, and efficient charging across multiple battery banks – with full Bluetooth control and a compact, workshop-ready design.

Victron Blue Smart IP22 Charger 12/20 (1) BPC122042002 – Professional 12V Smart Charger with BluetoothThe Victron Blue Smart IP22 Charger 12/20 (1) is a modern and intelligent 12V battery charger featuring a 6-stage charging algorithm and a maximum charge current of 20A, which can be reduced to 50% if needed. With built-in Bluetooth connectivity, it is easily configured and monitored via the VictronConnect app. Ideal for workshop use, as well as for vehicles, motorcycles, boats, and RVs.Smart Charging for All Battery TypesThis charger supports all common battery chemistries, including lithium. It includes pre-set charging profiles for various battery types and allows user-defined configurations. Even deeply discharged batteries can be recovered with its intelligent start function.Bluetooth Control with VictronConnectWith the VictronConnect app, you can monitor voltage, current, history, and settings via Bluetooth. This enables fully wireless control and diagnostics directly from your smartphone, tablet, or computer.Compact, Quiet, and VersatileCompact in size and silent in operation, this charger is equipped with durable 13 mm screw terminals for secure connections. It can also function as a DC power supply, delivering a stable voltage to connected loads.Key Features:✔ Charge Current: Max. 20A, adjustable to 50%✔ Charging Algorithm: 6-stage, designed for optimal battery care✔ Battery Types: Compatible with all types including lithium – preset and custom profiles available✔ Bluetooth: Wireless monitoring and configuration via VictronConnect✔ Power Supply Mode: Can be used as a constant-voltage DC source✔ AC Input: 180–265V AC, 45–65Hz, with 1.5 m power cable and Schuko plug✔ Output Terminals: 13 mm screw connections✔ Dimensions: 235 x 108 x 65 mm✔ Weight: 1.3 kgTechnical Specifications:Model:Victron Blue Smart IP22 Charger 12/20 (1) BPC122042002Output Voltage:12VMax Charge Current:20A (adjustable to 50%)Charging Algorithm:6-stage, user-configurableAC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput Terminals:13 mm screw terminalsDimensions:235 x 108 x 65 mmWeight:1.3 kgThe Victron Blue Smart IP22 Charger 12/20 delivers powerful, professional-grade charging with full Bluetooth control – a perfect choice for workshops, vehicles, and mobile energy systems.

Victron Blue Smart IP22 Charger 12/20 (3) BPC122044002 – 12V Smart Charger with 3 Outputs and BluetoothThe Victron Blue Smart IP22 Charger 12/20 (3) is a professional 12V battery charger with a 6-stage charging algorithm and a maximum charging current of 20A, which can be reduced to 50% if needed. Equipped with three isolated outputs sharing one charging profile, this charger is ideal for workshops, vehicles, RVs, and marine use.Smart Current Distribution Across 3 OutputsThe charger features three separate DC outputs that intelligently distribute charging current based on the battery state of charge. The weakest battery is prioritized, and the full 20A can be delivered to a single output if required. Please note that only one charging profile is active for all outputs.Compatible with All Battery TypesThe IP22 supports all common battery types, including lithium batteries. It includes a selection of preset charging profiles and allows custom configurations. It also recovers deeply discharged batteries safely and efficiently.Bluetooth Monitoring and ControlIntegrated Bluetooth allows full wireless access via the VictronConnect app for monitoring and configuring charging parameters, viewing history, voltage, and current – all from your smartphone, tablet, or PC.Compact, Versatile, and SilentThanks to its compact dimensions, silent operation, and durable 13 mm screw terminals, this charger is highly versatile. It can also operate as a DC power supply when stable output voltage is needed.Key Features:✔ Charging Current: Max. 20A, adjustable to 50%✔ Outputs: 3 separate outputs with shared charging profile✔ Smart Distribution: Current prioritized to the lowest charged battery✔ Battery Compatibility: All types including lithium, with preset and user-defined profiles✔ Bluetooth: Wireless control and monitoring via VictronConnect app✔ Power Supply Mode: Can be used as a constant-voltage DC source✔ AC Input: 180–265V AC, 45–65Hz, 1.5 m cable with Schuko plug✔ Output Terminals: 13 mm screw terminals✔ Dimensions: 235 x 108 x 65 mm✔ Weight: 1.3 kgTechnical Specifications:Model:Victron Blue Smart IP22 Charger 12/20 (3) BPC122044002Output Voltage:12VMax Charge Current:20A (adjustable to 50%)Outputs:3 isolated DC outputs with shared profileCharging Algorithm:6-stage, user-configurableAC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput Terminals:13 mm screw terminalsDimensions:235 x 108 x 65 mmWeight:1.3 kgThe Victron Blue Smart IP22 Charger 12/20 (3) delivers powerful, intelligent charging to multiple batteries simultaneously – with smart current distribution and full Bluetooth control.

Victron Blue Smart IP22 Charger 12/30 (1) BPC123047002 – 12V High-Performance Smart Charger with BluetoothThe Victron Blue Smart IP22 Charger 12/30 (1) is a high-capacity 12V battery charger featuring a 6-stage charging algorithm and a maximum charge current of 30A, which can be limited to 50% when needed. With integrated Bluetooth support, it offers advanced control and monitoring via the VictronConnect app. Ideal for workshop environments, mobile systems, and high-demand applications.Smart Charging for All Battery TypesCompatible with all major battery chemistries including lithium, this charger comes with preset charging profiles and supports custom configurations. Deeply discharged batteries can be recovered automatically thanks to its intelligent charging logic.Bluetooth Control with VictronConnectUsing Bluetooth, all parameters, charging data, and history can be accessed wirelessly through the VictronConnect app on your smartphone, tablet, or computer – ensuring full visibility and control over the charging process.Robust, Compact & VersatileThis model is designed for quiet operation, features robust 13 mm screw terminals, and can also operate as a DC power supply. Compact and efficient, it is ideal for both permanent installation and mobile applications.Key Features:✔ Charging Current: Max. 30A, adjustable to 50%✔ Charging Algorithm: 6-stage, fully configurable✔ Battery Types: Supports all battery types including lithium✔ Bluetooth: Wireless control via VictronConnect app✔ Power Supply Mode: Operates as regulated DC output✔ AC Input: 180–265V AC, 45–65Hz with 1.5 m cable and Schuko plug✔ Output Terminals: 13 mm screw terminals✔ Dimensions: 235 x 108 x 65 mm✔ Weight: 1.3 kgTechnical Specifications:Model:Victron Blue Smart IP22 Charger 12/30 (1) BPC123047002Output Voltage:12VMax Charge Current:30A (adjustable to 50%)Charging Algorithm:6-stage, user configurableAC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput Terminals:13 mm screw terminalsDimensions:235 x 108 x 65 mmWeight:1.3 kgThe Victron Blue Smart IP22 Charger 12/30 is the perfect high-performance solution for fast, safe, and smart battery charging – ideal for heavy-duty applications, mobile systems, and professional use.

Victron Blue Smart IP22 Charger 12/30 (3) BPC123048002 – 12V Smart Charger with 3 Outputs and BluetoothThe Victron Blue Smart IP22 Charger 12/30 (3) is a powerful 12V battery charger with a 6-stage charging algorithm and a maximum charge current of 30A, which can be reduced to 50% if needed. Equipped with three independent outputs, it is ideal for workshop setups, vehicles, RVs, and marine systems with multiple battery banks.Intelligent Distribution Across 3 OutputsThe charger automatically distributes current depending on the state of charge of each connected battery. The battery with the lowest charge is prioritized. Note: only one charging profile can be applied across all three outputs. If needed, the entire current can be supplied to just one output.Compatible with All Battery TypesThe charger supports all common battery chemistries, including lithium. It features a range of preset charging profiles and allows custom configurations. Deeply discharged batteries can be recovered safely and automatically.Wireless Control via BluetoothThanks to integrated Bluetooth, the charger can be controlled and monitored wirelessly using the VictronConnect app. Configure settings, view charge status, and access historical data via smartphone, tablet, or computer.Compact, Efficient, and VersatileWith its compact design, silent operation, and durable 13 mm screw terminals, the Blue Smart IP22 Charger 12/30 (3) is built for both mobile and stationary use. It can also function as a DC power supply when constant voltage output is required.Key Features:✔ Charge Current: Max. 30A, adjustable to 50%✔ Outputs: 3 separate DC outputs with shared charging profile✔ Smart Distribution: Priority to the weakest battery✔ Battery Compatibility: Suitable for all types, including lithium✔ Bluetooth: Configuration and monitoring via VictronConnect App✔ Power Supply Mode: Use as regulated DC source✔ AC Input: 180–265V AC, 45–65Hz, 1.5 m cable with Schuko plug✔ Terminals: 13 mm screw terminals✔ Dimensions: 235 x 108 x 65 mm✔ Weight: 1.3 kgTechnical Specifications:Model:Victron Blue Smart IP22 Charger 12/30 (3) BPC123048002Output Voltage:12VMax Charge Current:30A (adjustable to 50%)Outputs:3 separate outputs with single profileCharging Algorithm:6-stage, user-configurableAC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput Terminals:13 mm screw terminalsDimensions:235 x 108 x 65 mmWeight:1.3 kgThe Victron Blue Smart IP22 Charger 12/30 (3) is the perfect choice for fast, efficient, and intelligent multi-battery charging with Bluetooth control – suitable for demanding systems and professional setups.

Victron Blue Smart IP22 Charger 24/12 (1) BPC241242002 – 24V Smart Charger with BluetoothThe Victron Blue Smart IP22 Charger 24/12 (1) is an intelligent 24V battery charger featuring a 6-stage charging algorithm and a maximum charge current of 12A, adjustable to 50% if required. With integrated Bluetooth connectivity, the charger can be configured and monitored via the VictronConnect app, making it ideal for workshops, RVs, boats, and industrial applications.Efficient Charging for All Battery TypesThis charger supports all common battery types, including lithium. It features multiple preset charging profiles as well as fully user-configurable options. Deeply discharged batteries can also be safely recovered thanks to intelligent charging logic.Full Bluetooth MonitoringWith the VictronConnect app, you can access charge status, voltage, current, history and customize settings wirelessly via Bluetooth – from your smartphone, tablet, or computer.Compact, Versatile and QuietThe charger's compact housing, silent operation and durable 13 mm screw terminals make it suitable for a wide range of applications. It can also function as a power supply unit to deliver constant DC voltage to devices.Key Features:✔ Charge Current: Max. 12A, adjustable to 50%✔ Charging Algorithm: 6-stage, fully configurable✔ Battery Compatibility: Suitable for all types including lithium✔ Bluetooth: Wireless control and monitoring via VictronConnect app✔ Power Supply Mode: Can be used as a regulated DC source✔ AC Input: 180–265V AC, 45–65Hz, with 1.5 m cable and Schuko plug✔ Output Terminals: 13 mm screw terminals✔ Dimensions: 235 x 108 x 65 mm✔ Weight: 1.3 kgTechnical Specifications:Model:Victron Blue Smart IP22 Charger 24/12 (1) BPC241242002Output Voltage:24VMax Charge Current:12A (adjustable to 50%)Charging Algorithm:6-stage, user-configurableAC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput Terminals:13 mm screw terminalsDimensions:235 x 108 x 65 mmWeight:1.3 kgThe Victron Blue Smart IP22 Charger 24/12 (1) is the ideal 24V smart charging solution – compact, powerful, and fully controllable via Bluetooth for any advanced battery setup.

Victron Blue Smart IP22 Charger 24/16 (1) BPC241647002 – 24V Smart Charger with BluetoothThe Victron Blue Smart IP22 Charger 24/16 (1) is a high-performance 24V battery charger featuring a 6-stage charging algorithm and a maximum charge current of 16A, which can be reduced to 50% when needed. With integrated Bluetooth connectivity, the charger can be wirelessly monitored and configured via the VictronConnect app – perfect for workshop, marine, RV, or industrial use.Efficient Charging for All Battery TypesThe charger is compatible with all common battery chemistries, including lithium. It offers several preset charging profiles and allows full user-defined customization. Even deeply discharged batteries can be safely recharged.Wireless Control via BluetoothWith the VictronConnect app, you can wirelessly view and adjust charging parameters, voltage, current, and history using your smartphone, tablet, or PC – providing full control and visibility at all times.Compact, Quiet, and VersatileThanks to its compact design, fanless passive cooling, and 13 mm screw terminals, the charger is ideal for various mobile and stationary applications. It also functions as a DC power supply with regulated voltage output.Key Features:✔ Charge Current: Max. 16A, adjustable to 50%✔ Charging Algorithm: 6-stage, fully configurable✔ Battery Compatibility: Suitable for all types, including lithium✔ Bluetooth: Full monitoring and control via VictronConnect App✔ Power Supply Mode: Can be used as a regulated DC source✔ AC Input: 180–265V AC, 45–65Hz, 1.5 m power cable with Schuko plug✔ Output Terminals: 13 mm screw terminals✔ Dimensions: 235 x 108 x 65 mm✔ Weight: 1.3 kgTechnical Specifications:Model:Victron Blue Smart IP22 Charger 24/16 (1) BPC241647002Output Voltage:24VMax Charge Current:16A (adjustable to 50%)Charging Algorithm:6-stage, user-configurableAC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput Terminals:13 mm screw terminalsDimensions:235 x 108 x 65 mmWeight:1.3 kgThe Victron Blue Smart IP22 Charger 24/16 (1) is the ideal choice for high-performance, safe, and smart 24V battery charging – compact, powerful, and fully Bluetooth enabled.

Victron Blue Smart IP22 Charger 24/16 (3) BPC241648002 – 24V Smart Charger with 3 Outputs and BluetoothThe Victron Blue Smart IP22 Charger 24/16 (3) is an intelligent 24V battery charger with a 6-stage charging algorithm and a maximum charge current of 16A, which can be reduced to 50% if necessary. Equipped with three independent DC outputs, it is ideal for workshop setups, RVs, boats, and systems with multiple battery banks.Smart Current Distribution Across 3 OutputsThe charger automatically distributes charging current based on the state of charge of each connected battery. The weakest battery is prioritized. A single charging profile applies to all three outputs. The full 16A output can also be directed to just one output when needed.Compatible with All Battery TypesCompatible with all common battery chemistries including lithium. The unit features preset charge profiles and allows full user configuration via the VictronConnect app. It also supports safe recovery of deeply discharged batteries.Bluetooth Control via VictronConnectThanks to built-in Bluetooth, the charger can be wirelessly configured and monitored using the VictronConnect app. Track voltage, current, charge history, and configure settings from your smartphone, tablet, or PC.Compact, Silent, and VersatileWith its compact design, fanless passive cooling, and 13 mm screw terminals, the Blue Smart IP22 Charger 24/16 (3) is well suited for both mobile and stationary use. It can also function as a DC power supply for stable voltage output to connected devices.Key Features:✔ Charge Current: Max. 16A, adjustable to 50%✔ Outputs: 3 separate outputs with shared charging profile✔ Smart Distribution: Priority given to the most discharged battery✔ Battery Compatibility: Suitable for all types including lithium✔ Bluetooth: Control and monitor via VictronConnect app✔ Power Supply Mode: Can act as a regulated DC power source✔ AC Input: 180–265V AC, 45–65Hz, with 1.5 m cable and Schuko plug✔ Output Terminals: 13 mm screw terminals✔ Dimensions: 235 x 108 x 65 mm✔ Weight: 1.3 kgTechnical Specifications:Model:Victron Blue Smart IP22 Charger 24/16 (3) BPC241648002Output Voltage:24VMax Charge Current:16A (adjustable to 50%)Outputs:3 separate outputs (one charge profile)Charging Algorithm:6-stage, user-configurableAC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput Terminals:13 mm screw terminalsDimensions:235 x 108 x 65 mmWeight:1.3 kgThe Victron Blue Smart IP22 Charger 24/16 (3) offers intelligent, safe, and Bluetooth-enabled charging for multi-bank 24V systems – compact, efficient, and professional-grade.

Victron Blue Smart IP65 Charger 12/10 + DC Connector BPC121031064RThe Blue Smart IP65 Charger 12/10 by Victron is a professional-grade 12V battery charger with a robust design and built-in Bluetooth functionality. Suitable for all common battery types—including lithium—it is ideal for workshop applications and use with vehicles such as cars, motorcycles, boats, and RVs.Key Features✔ Compatible with all battery types, including lithium✔ Maximum charging current: 10A✔ Intelligent 7-stage charging algorithm for optimal battery care✔ 1.5 m power cable (230V, 50–60 Hz)✔ IP65 protection – dust- and water-resistant✔ Reverse polarity and over-temperature protection✔ Revives deeply discharged (“dead”) batteries✔ Can be used as a charger or power supply✔ Includes M8 eyelets and crocodile clips for easy connection✔ Bluetooth connectivity via VictronConnect app for monitoring and configurationSpecial FeaturesThis charger uses an advanced 7-stage charging algorithm to deliver a full and safe charge, helping to extend battery life and ensure optimal performance. Deeply discharged batteries are gently reactivated with a low start current before switching automatically to regular charging mode.With built-in Bluetooth, you can monitor and configure the device remotely using the VictronConnect app on your smartphone, tablet, or laptop. The IP65-rated housing ensures reliable performance even in tough indoor or outdoor conditions.Technical SpecificationsRated voltage: 12VMax charging current: 10AInput voltage: 230V (50–60 Hz)Protection rating: IP65Operating temperature: -40°C to +60°CDimensions (LxHxW): 60 x 105 x 190 mmWeight: 0.9 kg

Victron Energy Blue Smart IP65 Charger 12/15 + DC ConnectorThe Victron Energy Blue Smart IP65 Charger 12/15 is a high-quality, intelligent 12V battery charger suitable for virtually all battery types, including modern lithium batteries. With its robust IP65 protection rating, Bluetooth connectivity and comprehensive safety features, it is ideal for workshops, garages, caravans, boats and industrial applications.Key Features:✔ Universal compatibility: Suitable for lead-acid, AGM, gel and lithium batteries.✔ High charging current: Up to 15 A for fast and efficient charging.✔ 7-stage charging algorithm: Intelligent charging for maximum battery lifespan.✔ Bluetooth control: Easy monitoring and configuration via smartphone.✔ Rugged design: IP65 rated – dust-tight and protected against water jets.Technical Specifications:✔ Battery system: 12 V✔ Maximum charging current: 15 A✔ Mains input: 230 V AC, 50–60 Hz✔ Power cable: 1.5 m cable with mains plug✔ Battery connection: M8 eyelets and alligator clips included✔ Operating temperature: −40 °C to +60 °C✔ Dimensions (HxWxD): 60 × 105 × 190 mmAdditional Features:✔ Reverse polarity protection and over-temperature protection for maximum safety.✔ Suitable for deeply discharged batteries.✔ Can be used as a battery charger or as a stable power supply.The Victron Energy Blue Smart IP65 Charger 12/15 stands out with its intelligent charging technology, high safety standards and exceptional flexibility. Thanks to Bluetooth connectivity, rugged construction and universal compatibility, it is the perfect solution for both professional and private use.

Victron Blue Smart IP65 Charger 12/25 + DC Connector BPC122531064The Victron Blue Smart IP65 Charger 12/25 is a powerful 12V battery charger designed for professional use, featuring integrated Bluetooth and cutting-edge charging technology. Suitable for all battery types—including lithium—it’s the ideal choice for workshops, vehicles, boats, and motorhomes.Key Features✔ Compatible with all battery types, including lithium✔ Maximum charging current: 25A✔ Intelligent 7-stage charging algorithm for optimal performance✔ 1.5 m AC power cable (230V, 50–60 Hz)✔ IP65-rated – dust- and water-resistant✔ Reverse polarity and over-temperature protection✔ Capable of reviving deeply discharged (“dead”) batteries✔ Functions as a battery charger or power supply✔ Includes M8 eyelet cables and crocodile clamps✔ Bluetooth-enabled for control and monitoring via VictronConnect appSpecial FeaturesThe advanced 7-stage charging algorithm ensures your battery is charged efficiently, safely, and completely—improving both performance and lifespan. Unlike conventional chargers, it can recover deeply discharged batteries by applying a low start current and switching to regular mode once sufficient voltage is detected.Thanks to its integrated Bluetooth, you can monitor and configure the charger remotely using the VictronConnect app on your smartphone, tablet, or laptop. The IP65-certified design makes it suitable for both indoor and outdoor use, even in challenging environments.Technical SpecificationsNominal voltage: 12VMax charging current: 25AInput voltage: 230V (50–60 Hz)Protection rating: IP65Operating temperature: -40°C to +60°CDimensions (LxHxW): 75 x 140 x 240 mmWeight: 1.9 kg

Victron Blue Smart IP65 Charger 12/5 + DC Connector BPC120533064RThe Victron Blue Smart IP65 Charger 12/5 is an ultra-compact and versatile 12V battery charger with integrated Bluetooth. It is suitable for all battery types—including lithium—and delivers reliable charging performance for workshop applications as well as mobile use with cars, motorcycles, boats, and motorhomes.Key Features✔ Compatible with all battery types, including lithium✔ Maximum charging current: 5A✔ Intelligent 7-stage charging algorithm✔ 1.5 m power cable (230V, 50–60 Hz)✔ IP65 protection – dust- and water-resistant✔ Reverse polarity and over-temperature protection✔ Recovers deeply discharged (“dead”) batteries✔ Can function as a battery charger or power supply✔ Includes M8 eyelet cables and crocodile clips✔ Bluetooth control and monitoring via VictronConnect appSpecial FeaturesThe 7-stage charging algorithm provides safe, complete, and efficient charging, helping to improve battery performance and extend its life. Even deeply discharged batteries can be recovered—the charger starts with a gentle current and automatically switches to regular mode once sufficient voltage is detected.With built-in Bluetooth, the device can be monitored and configured conveniently via the VictronConnect app on your smartphone, tablet, or laptop. Its rugged IP65-rated design makes it ideal for both indoor and outdoor environments.Technical SpecificationsNominal voltage: 12VMax charging current: 5AInput voltage: 230V (50–60 Hz)Protection rating: IP65Operating temperature: -40°C to +60°CDimensions (LxHxW): 45 x 81 x 182 mmWeight: 0.6 kg

Victron Blue Smart IP65 Charger 12/7 + DC Connector BPC120731064RThe Victron Blue Smart IP65 Charger 12/7 is a compact, professional-grade 12V battery charger featuring built-in Bluetooth. It is compatible with all battery types—including lithium—and is ideal for both workshop use and mobile applications such as cars, motorcycles, boats, or RVs.Key Features✔ Suitable for all battery types, including lithium✔ Maximum charging current: 7A✔ Smart 7-stage charging algorithm✔ 1.5 m power cable (230V, 50–60 Hz)✔ IP65 rating – dust- and water-resistant✔ Built-in reverse polarity and over-temperature protection✔ Recovers deeply discharged (“dead”) batteries✔ Can be used as a charger or power supply✔ Includes M8 eyelets and crocodile clips✔ Bluetooth-enabled for monitoring and configuration via VictronConnect appSpecial FeaturesThe 7-stage charging algorithm ensures safe, efficient, and complete battery charging, helping to enhance performance and extend battery lifespan. Even deeply discharged batteries can be recovered—starting with a gentle current before switching to normal charging once sufficient voltage is reached.Thanks to built-in Bluetooth, you can conveniently monitor and configure the charger using the VictronConnect app on your smartphone, tablet, or laptop. Its rugged IP65-rated housing ensures durability even in harsh environments.Technical SpecificationsNominal voltage: 12VMax charging current: 7AInput voltage: 230V (50–60 Hz)Protection rating: IP65Operating temperature: -40°C to +60°CDimensions (LxHxW): 47 x 95 x 190 mmWeight: 0.8 kg

Victron Blue Smart IP65 Charger 24/13 + DC Connector BPC241331064The Victron Blue Smart IP65 Charger 24/13 is a high-performance 24V battery charger with integrated Bluetooth, designed for professional use in workshops and with vehicles, boats, or motorhomes. Compatible with all battery types—including lithium—it combines reliability with intelligent charging technology.Key Features✔ Suitable for all battery types, including lithium✔ Maximum charging current: 13A✔ Smart 7-stage charging algorithm for optimal battery health✔ 1.5 m AC power cable (230V, 50–60 Hz)✔ IP65 protection rating – dust- and water-resistant✔ Built-in reverse polarity and over-temperature protection✔ Restores deeply discharged (“dead”) batteries✔ Can function as a battery charger or a power supply✔ Includes M8 eyelet cables and crocodile clamps✔ Bluetooth control and monitoring via VictronConnect appSpecial FeaturesThe integrated 7-stage charging algorithm ensures your battery is charged safely and efficiently, improving both performance and lifespan. Even deeply discharged batteries can be revived by applying a gentle start current—once the voltage rises, the charger automatically switches to normal mode.Thanks to Bluetooth functionality, the device can be monitored and configured remotely using the VictronConnect app on your smartphone, tablet, or laptop. Its rugged, weatherproof IP65 design makes it ideal for indoor and outdoor environments alike.Technical SpecificationsNominal voltage: 24VMaximum charging current: 13AInput voltage: 230V (50–60 Hz)Protection rating: IP65Operating temperature: -40°C to +60°CDimensions (LxHxW): 75 x 140 x 240 mmWeight: 1.9 kg

Victron Blue Smart IP65 Charger 24/5 + DC Connector BPC240531064RThe Victron Blue Smart IP65 Charger 24/5 is a compact and reliable 24V battery charger with integrated Bluetooth. Compatible with all battery types—including lithium—it is ideal for use in workshops and with vehicles, motorcycles, boats, and motorhomes.Key Features✔ Suitable for all battery types, including lithium✔ Maximum charging current: 5A✔ Intelligent 7-stage charging algorithm for optimal battery care✔ 1.5 m power cable (230V, 50–60 Hz)✔ IP65-rated – dust- and water-resistant✔ Built-in reverse polarity and over-temperature protection✔ Capable of reviving deeply discharged (“dead”) batteries✔ Can function as a charger or power supply✔ Includes M8 eyelets and crocodile clips✔ Bluetooth-enabled for control via VictronConnect appSpecial FeaturesThis charger uses a smart 7-stage algorithm to charge your battery safely, efficiently, and completely. It helps to maintain battery health and extend its service life. Even deeply discharged batteries can be brought back to life by applying a low initial current, switching to standard charging once sufficient voltage is detected.Thanks to built-in Bluetooth, you can monitor and configure the device via the VictronConnect app on your smartphone, tablet, or laptop. Its rugged IP65-rated casing makes it perfect for both indoor and outdoor use—even in demanding environments.Technical SpecificationsNominal voltage: 24VMax charging current: 5AInput voltage: 230V (50–60 Hz)Protection rating: IP65Operating temperature: -40°C to +60°CDimensions (LxHxW): 47 x 95 x 190 mmWeight: 0.8 kg

Victron Blue Smart IP65 Charger 24/8 + DC Connector BPC240831064RThe Blue Smart IP65 Charger 24/8 by Victron is a professional-grade, weather-resistant 24V battery charger with built-in Bluetooth. Designed for all battery types—including lithium—it’s perfect for use in workshops or for charging vehicles like cars, motorcycles, boats, and RVs.Key Features✔ Suitable for all battery types, including lithium✔ Maximum charging current: 8A✔ Intelligent 7-stage charging algorithm✔ 1.5 m power cable (230V, 50–60 Hz)✔ Protection class: IP65 – dust and water-resistant✔ Reverse polarity and over-temperature protection✔ Capable of reviving deeply discharged batteries✔ Can be used as a battery charger or power supply✔ Includes M8 eyelet cables and crocodile clips✔ Bluetooth monitoring and control via smartphoneSpecial FeaturesThe advanced 7-stage charging algorithm maximizes battery performance, health, and lifespan. Unlike many other chargers, the Blue Smart IP65 can revive deeply discharged or "dead" batteries by applying a gentle current until normal charging can resume.With integrated Bluetooth, you can monitor and configure the charger remotely using the VictronConnect app on your smartphone, tablet, or laptop. Its IP65 rating ensures rugged performance, making it ideal for both indoor and outdoor environments.Technical SpecificationsRated voltage: 24VMax charging current: 8AInput voltage: 230V (50–60 Hz)Protection class: IP65Operating temperature: -40°C to +60°CDimensions (LxHxW): 60 x 105 x 190 mmWeight: 0.9 kg

Victron Blue Smart IP67 Charger 12/13 (1) BPC121313006 – Waterproof 12V Charger with BluetoothThe Victron Blue Smart IP67 Charger 12/13 (1) BPC121313006 is a high-performance 12V battery charger featuring a 5-stage charging algorithm and an optional 4A setting. Designed for demanding environments, it is fully waterproof to IP67 standard and operates silently with passive cooling.Advanced Charging with Battery ProtectionThe enhanced 7-stage charging algorithm optimizes your battery’s performance: delivering the right amount of power, maintaining a healthy charge, and ensuring better performance and longer life. Even deeply discharged batteries can be recovered by the Blue Smart IP67 Charger – it starts with a gentle forced current and switches to normal charging once sufficient voltage is detected.Full Control via BluetoothWith built-in Bluetooth, all parameters can be conveniently configured and monitored using the VictronConnect app on your smartphone, tablet, or laptop. You can view charge status, history, and real-time performance at any time.Rugged, Waterproof, and SilentThe IP67 rating makes the charger completely resistant to dust and moisture. It’s perfect for tough environments such as workshops, boats, RVs, and outdoor use. No fan, no noise – completely silent thanks to its passively cooled aluminum housing.Key Features:✔ Charge Current: Max. 13A, switchable to 4A mode.✔ Charging Algorithm: 5-stage profile with extended 7-stage battery maintenance.✔ Battery Recovery: Automatically attempts to recharge deeply discharged batteries.✔ Bluetooth Enabled: Full control via VictronConnect App.✔ Battery Compatibility: Supports all battery types including lithium – with predefined or custom profiles.✔ Power Supply Mode: Usable as a stable DC power source.✔ Waterproof (IP67): Completely sealed against dust and moisture.✔ Silent Operation: No fans – cooled passively via aluminum housing.✔ Connections: 1.5 m power cable with Schuko plug, 1 m output with ring terminals.✔ Compact & Lightweight: Dimensions 85x211x60 mm, Weight 1.8 kg.Technical Specifications:Model:Victron Blue Smart IP67 Charger 12/13 (1) BPC121313006Output Voltage:12VMax Charge Current:13A (also selectable to 4A)Charging Algorithm:5-stage (enhanced to 7-stage maintenance)AC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugDC Output Cable:1 m with ring terminalsProtection Class:IP67 – waterproof & dustproofCooling:Passive, fanlessDimensions:85x211x60 mmWeight:1.8 kgThe Victron Blue Smart IP67 Charger 12/13 is a durable, waterproof battery charger with smart charging technology and wireless app control – perfect for automotive, marine, workshop, and outdoor applications.

Victron Blue Smart IP67 Charger 12/17 (1) BPC121713006 – Waterproof 12V Charger with BluetoothThe Victron Blue Smart IP67 Charger 12/17 (1) BPC121713006 is a high-performance 12V battery charger featuring a 5-stage charging algorithm and an optional 6A setting. Built for harsh environments, it is fully waterproof (IP67) and operates completely silently thanks to passive cooling.Advanced Charging Technology with ProtectionThe enhanced 7-stage charging algorithm delivers exactly the power your battery needs, keeps it in optimal condition, and ensures longer life and better performance. Even deeply discharged batteries can be recovered – the charger begins with a low forced current and resumes normal charging once sufficient voltage is detected.Full Control via BluetoothWith integrated Bluetooth, you can easily configure and monitor all parameters via the VictronConnect app on your smartphone, tablet, or laptop. You’ll have access to charge status, history, and real-time performance data anytime.Robust, Waterproof, and SilentThanks to its IP67 rating, the device is completely sealed against dust and moisture. It’s ideal for challenging environments such as workshops, boats, RVs, and outdoor installations. No fan, no noise – 100% silent in operation.Key Features:✔ Charge Current: Max. 17A, switchable to 6A mode.✔ Charging Algorithm: 5-stage profile with 7-stage battery optimization.✔ Battery Recovery: Automatically attempts to charge deeply discharged batteries.✔ Bluetooth Enabled: Full control via VictronConnect App.✔ Battery Compatibility: Supports all battery types including lithium – predefined or custom profiles.✔ Power Supply Function: Can also be used as a stable DC power source.✔ Waterproof to IP67: Fully protected against dust and moisture.✔ Silent Operation: Fanless – passively cooled aluminum housing.✔ Connections: 1.5 m power cable with Schuko plug, 1 m output cable with ring terminals.✔ Compact and Powerful: Dimensions 99x219x65 mm, Weight 2.4 kg.Technical Specifications:Model:Victron Blue Smart IP67 Charger 12/17 (1) BPC121713006Output Voltage:12VMax Charge Current:17A (switchable to 6A)Charging Algorithm:5-stage (enhanced to 7-stage maintenance)AC Input:180–265V AC, 45–65HzPower Cable:1.5 m with Schuko plugOutput Cable:1 m with ring terminalsProtection Rating:IP67 – waterproof & dustproofCooling:Passive, fanlessDimensions:99x219x65 mmWeight:2.4 kgThe Victron Blue Smart IP67 Charger 12/17 is a robust, waterproof, and smart charger that delivers high power and wireless control – ideal for automotive, marine, and off-grid charging environments.

Victron Blue Smart IP67 Charger 12/25 (1) BPC122547006 – Waterproof 12V Charger with BluetoothThe Victron Blue Smart IP67 Charger 12/25 (1) BPC122547006 is a powerful 12V battery charger featuring a 5-stage charging algorithm and an optional 10A setting. Built for harsh conditions, it is fully waterproof to IP67 and operates completely silently thanks to passive cooling.Efficient Charging with Battery ProtectionThe advanced 7-stage charging algorithm delivers the optimal amount of power for maximum battery health and performance. Even deeply discharged batteries can be recovered – the charger starts with a gentle forced current and automatically switches to normal operation once the battery voltage is high enough.Full Control via BluetoothWith integrated Bluetooth, the charger can be fully configured and monitored via the VictronConnect app on your smartphone, tablet, or laptop. View charge history, current status, and adjust all settings with ease.Durable, Waterproof and SilentThe IP67 protection rating makes the charger completely resistant to dust and moisture. It is ideal for marine environments, mobile setups, outdoor installations, or workshop use. No fan, no noise – just reliable, silent operation with passive aluminum cooling.Key Features:✔ Charge Current: Max. 25A, switchable to 10A mode.✔ Charging Algorithm: 5-stage profile with extended 7-stage battery optimization.✔ Battery Recovery: Automatically attempts to recharge deeply discharged batteries.✔ Bluetooth Enabled: Full configuration and monitoring via VictronConnect app.✔ Battery Compatibility: Supports all types including lithium – with default or custom profiles.✔ Power Supply Mode: Can also function as a constant DC power source.✔ Waterproof to IP67: Completely protected from dust and moisture.✔ Silent Operation: Fanless – passively cooled aluminum design.✔ Connections: 1.5 m AC cable with Schuko plug, 1 m output cable with ring terminals.✔ Compact and Powerful: Dimensions 99x219x65 mm, Weight 2.4 kg.Technical Specifications:Model:Victron Blue Smart IP67 Charger 12/25 (1) BPC122547006Output Voltage:12VMax Charge Current:25A (switchable to 10A)Charging Algorithm:5-stage (enhanced to 7-stage maintenance)AC Input:180–265V AC, 45–65HzAC Cable:1.5 m with Schuko plugDC Output Cable:1 m with ring terminalsProtection Class:IP67 – waterproof & dustproofCooling:Passive, fanlessDimensions:99x219x65 mmWeight:2.4 kgThe Victron Blue Smart IP67 Charger 12/25 combines rugged design, high charging power, and smart connectivity – making it the ideal solution for demanding marine, workshop, and outdoor applications.